Monthly Archives: April 2014

keltainen pöllö

A yellow owl that brings happiness

“keltainen pöllö” – this enigmatic sounding name is actually made up of Finnish words. It means a yellow owl. This name was chosen for the series to represent the simple and design-oriented appeal of Scandinavian fabrics. Owls are said to bring good luck and are a popular motif in Europe. Through this fabric, we wish happiness is brought to those who come in contact.
Smooth sateen, versatile broadcloth, slightly thick Oxford (OX) and soft double gauze line up the series with different design motifs. We hope you will enjoy paring the different textures and designs in your projects.

Apple Dots P27200-200   60 Sateen
P27200_200_1

  • P27200_200_2
  • P27200_200_3
  • P27200_200_4

In this graphical design fabric, apples made of dots are regularly lined. Its bicolor tones remind you of a simple Scandinavian design. With small repetitive motifs covering the entire fabric, wherever you cut it you will have the same pattern and it is perfect for making small goods. Culinary items like oven mitts or place mats will look great in this apple motif fabric. It is of course ideal for making small cases or coin purses.

Continue reading

Irome patchwork pillow : imagine gnats for kokka

patchwork pillow featuring irome

hi, I’m Rachael Gander, and you can find my blog and original patterns at imagine gnats. I’m excited to be sharing the patchwork pillow I made with Irome, the fabulous new line of quilting cottons from Kokka.

there are so many great prints and colors in this line that I honestly wasn’t sure where to start, but when I saw Ellen Luckett Baker’s version of this project from Quilting Happiness, I felt inspired to pick a few of my favorite prints and give it a go.

patchwork pillow featuring irome

possibly because I’m still in recovery from the winter that felt like it would never end… I found myself drawn to the deep navy, bright greens, and vibrant shades of the summer colorway. paired with one of the low volume prints of the winter colorway, they really pop in this design.

patchwork pillow featuring irome

I quilted the pillow with a lime green 40wt thread from aurifil, echoing the herringbone pattern of the patchwork. at 18″ square, this pillow is larger than the pattern in the book. I mean, who can stop at 12″ when these prints are so darned lovely?

patchwork pillow featuring irome

I finished the back of the pillow with a zipper, and I’m thinking I might make up similar pillows with the fall and spring colorways too. then I can switch them out depending on which season I’m missing! and all of the prints in this line are so lovely that I’ll end with something pretty to look at no matter which one I choose.

patchwork pillow featuring irome

This post was written by Rachael Gander for the Irome collection series, coordinated by Frances Arikawa for Kokka.
Irome is a quilting cotton collection that will be officially released at Quilt Market in Pittsburgh on May 16th 2014. If you would like to be able to purchase prints from the Irome collection locally, please be sure to let your favourite fabric store know.

GARDEN Butterfly case

Size (roughly): 16cm (l), 22cm (width at top opening), 6cm (d)

Today’s project, made with Ellen Baker’s GARDEN series fabric, is perfect for this time of the year, a time that we are eagerly awaiting the arrival of spring. From the series, a lovely butterfly design was chosen for a small case with a zipper top. Yumi Kanaya, the creator and an expert of embroidery, came up with a cute case of butterflies with stitch embellishment.

Design & work created by:Yumi Kanaya, Y*RT2 HANDMADE


Fabric shown for this sample:

(Outer fabric A, C): GARDEN JG41700-6 (C)
(Outer fabric B, Lining fabric): GARDEN JG41700-5 (B)
(Bottom outer fabric): GARDEN JG41700-5 (C)( C)


Materials:
□ Fabric (Outer fabric A, C): 50cm×20cm
(Outer fabric B, Lining fabric): 30cm×40cm
(Bottom outer fabric): 30cm×20cm
□ Fusible quilt batting : 30cm×40cm
□ Torchon lace: 50cm (2.5cm width)
□ Leather tab: One piece – 6.5cm×3cm
□ Zipper: One 20cm zipper
□ Embroidery thread #25: White and Brown, One skein each

cs44_pouch

We interviewed Ms. Kanaya about her creation:
Kokka Fabric(KF): What did you think about the fabric you used for this project?
YK: It is a series called GARDEN by an American designer, Ellen Baker. It is very attractive with a natural and smoky color combination. Since the different designs come in the same color tones, I decided to pair them up to do a patchwork.

KF:Can you tell us about any special elements or ideas that you incorporated into this creation?
YK: Butterfly motifs are placed as a main design element with a gray and yellow color combination. The fabric is accented with patchwork and embroidery. Since the fabric has lots of embellishments, I intentionally kept the case’s design simple. It is a case with depth and a zipper opening.

KF:What are some tips for making this case?
YK: When cutting the fabric, I paid extra attention so that the butterfly motif will be centered in the design. Since the texture of the fabric itself is tight and solid, I added only fusible quilt batting to give it thickness and softness. The zipper is attached in between the outer and lining fabrics. This way it is easy to sew and keeps the blind stitches minimum.

KF:How should we use this case in everyday settings?
YK: While I made a little case this time, the fabric’s look is suitable for making kitchen items like coasters, placemats and tea pot covers. The ideas keep flowing.

KF:Thank you very much, Ms. Kanaya! Here are sewing instructions along with step by step photos from her. Enjoy crafting!

GARDEN Butterfly case

1.
cs44_1
Cut the outer fabrics.

2.
cs44_2
Cut the torchon lace matching the size of the fabric.

3.
cs44_3cs44_4
Piece together outer fabric A, C and B and press down the seam allowance using an iron. Make two pieces.

4.
cs44_5
Attach lace to the fabric created in step 3, 5mm inside from the edge.

5.
cs44_6
With front/outer side facing each other, sew together the pieced outer fabric (from Step 3) and bottom outer fabric. Stitch inside the stitch line created in Step 4. (This allows the lace to be exposed most and look consistent)

6.
cs44_7
Attach torchon lace on both sides and press them down using an iron.

7.
cs44_8cs44_9
Adhere fusible quilt batting to the back of the outer fabric (from Step 6). Following the butterfly pattern, apply embroidery (using six strands of threads). For clews, use a French knot stitch. White cross uses a back stitch. A rough running stitch is applied to the outer bottom.

8.
cs44_10cs44_11
Cut the lining fabric. With front/outer side facing each other, piece together outer fabric and lining fabric, with a zipper in-between. After the zipper is attached, turn it over and press with iron.

9.
cs44_12
Fold a leather tab in half. Baste it 1cm below the zipper. (The tab should be placed to appear on the left side of the outer front fabric).

10.
cs44_13
With reverse side showing, open it so that the zipper is located in the center. Sew both sides, 1cm from the edge. On the lining fabric, leave an opening for about 5cm so that the case can be turned inside out later.

11.
cs44_14
Cut off the four corners (fold line of top and bottom) for 2cm (l) x 3cm (w). (This becomes the gusset).

12.
cs44_15
Open the four corners so that it creates a triangle shape. Sew the gusset. Turn it inside out using the opening to look like the picture after turning.

13.
cs44_16
Close the opening on the lining fabric.

14.
cs44_17
Voila!

Click here for Sewing Instructions (PDF format / A4 size)
button_tt

Inspiration file 45  Cosplay*1) dresses with fun fabric

in45

Soft double gauze fabrics from Joielinne collection, which we recently featured in our Textile Story column, are perfect for any apparel. One in this collection named “stripe patch”, that is the striped textile look with various patterns, is especially popular among sewing lovers.

I received an exciting mail that read, “I made something straightaway with that fabric!” The mail was from Masumi Saito who uses the pseudonym “sinafuku,” and she is well known to you since her items are frequently featured on this website. The girls in the picture are her daughters.

Saito said, “I was supposed to make a face mask with the fabric. But just after receiving the fabric, I got tickets for the Charan-Po-Rantan’s concert.*2) I then made a project change to sew costumes for my girls.”

Since introduced by her friend, Saito has been a big fan of Charan-Po-Rantan and dreamed to go the concert with her children cosplaying as the music duo.

Tada! These are the costumes Saito made with “stripe patch” fabric to go to the concert. Besides the colorful apron dresses, she made pointed hats by copying Charan-Po-Rantan’s costume. Now, to the show venue! What happened at the concert? Her two young daughters’ “cosplay” fashion won Charan-Po-Rantan’s favor, took pictures with the duo, and got their autographs on their hats. It was an unforgettable day for Saito and her daughters.

The theme of Joielinne collection is “the fabric everyone enjoys with”. This fabric indeed brought Saito the fun time with her children dressing as her favorite artist.

Saito posted about the concert on her blog at http://ameblo.jp/kittenishgirl-sinafuku/

*1) Cosplay is short for “costume play”, in which people dress up as their favorite characters.

*2) Charan-Po-Rantan is a sisters’ duo in Japan. Young sister is the vocalist while the older one plays an accordion.

Small case with metal clasps in the GARDEN fabric

サイズ:14cm (w), 8cm (l), 14cm (d)

Today’s project is a small case with metal clasps, using Ellen Baker’s GARDEN series of fabric. The square design gives you plenty of room to carry things as the depth of the case is as deep as the width in the front. When piecing together two outer fabrics, make sure to press the seam open using an iron for a clean finish. Repeat the process for the lining fabric as well. Once the clasps are placed, use a nipper to hold the clasp so that the fabric will stay in place. To avoid the nipper from scratching the clasps, place a piece of fabric in-between.

Materials

□ Outer Fabric A: 20cm (110cm width)
□ Outer Fabric B: 20cm (110cm width)
□ Lining Fabric: 20cm (110cm width)
□ Interfacing: 20cm (90cm width)
□ Metal Clasp: One piece (9cm (w) x 7cm (l)


Fabric shown for this sample:(Outer Fabric A)GARDEN JG 41700-3 (A)
(Outer Fabric B)GARDEN JG 41700-5 (A)

cs43

Click here for Sewing Instructions (PDF format / A4 size)
button_tt